Because Electrolux owns Frigidaire, both brands use the same “E-series” error codes — and many are simple, do-it-yourself fixes rather than a reason to replace the machine. Here’s what each Frigidaire/Electrolux washer code means, what to try first, and when to call a technician.

Frigidaire & Electrolux washer error codes at a glance

Codes vary slightly by model — check your manual if yours isn’t listed.

The most common codes — and how to fix them

E10 / E11 — won’t fill

The washer isn’t getting water fast enough. Try first: open both taps fully, straighten the fill hoses, and clean the inlet screens. Still stuck? The inlet valve may need replacing — see washer won’t fill.

E20 / E21 — won’t drain

The most common Frigidaire code: water can’t drain. Try first: clean the drain-pump filter (behind the lower front panel) and clear the drain hose. Still stuck? The drain pump may be failing — see washer won’t drain.

E40–E43 — door won’t lock

The door isn’t registering as closed and locked. Try first: close it firmly and clear any obstruction. Still stuck? The door-lock assembly is a common, affordable replacement.

E50 — motor fault

A motor or motor-control problem. This isn’t a DIY fix — it needs a technician to check the connections and motor.

The bottom line

Most Frigidaire and Electrolux washer codes come down to an inexpensive part or a simple blockage — repairing is almost always cheaper than replacing. If a code won’t clear, we repair Frigidaire and Electrolux washers (and every major brand) across DFW, usually same-day. Not sure yours is worth fixing? See our washer repair-or-replace guide.

Call (817) 900-8324 Schedule Online

Washer showing an error? · Appliance repair FAQ